An Introduction to Fire Sprinkler Repair

If your building is equipped with a sprinkler device, you are correct to feel a little more comfortable. You should relax assured knowing that the device will respond instantly and keep you healthy by preventing the explosion before the fire brigade appears if a fire breaks out. This can only happen, though, if you have practised control of the sound fire sprinkler mechanism. Systems that are not handled correctly may not function like they are meant to, and could end up costing you the ultimate amount. But let’s have a look at what goes into running the fire sprinkler device and then take steps and make sure you are doing what ‘s required. Guard Fire Protection – Fire Sprinkler Repair┬áhas some nice tips on this.

How Sprinklers Work

But first let’s take a brief peek into how the fire sprinklers really work. In the film, the sprinkler on the floor of the building goes off with the slightest sign of flames, bathing the whole room with spray.

But that’s not the way it really operates. Every sprinkler head is designed to go off only when the area around it is hot enough to melt the fusible connexion which blocks water flow. But in practise, a fire may only wake one or two heads, who would operate to suppress the blaze before the authorities made it to the point.

Why is it so important? We ‘re going to find out quickly but the lesson is that each head requires its own maintenance. It’s not that both of them operate on a single activation device because if one doesn’t function well, the rest can only take up the slack.

The Valve Regulation

Any debate about operation of the fire sprinkler device has to contact the control valve. It’s an integral part of every device of fire sprinklers, and easy to test too. In your house, basically, there is a valve that must stay open to enable the water source to circulate. If this switch is disabled, the sprinklers won’t get water which will be worthless in the event of a flood. Unfortunately, the major source of extensive fire loss is the closed valves.

The good news is that valve inspections are potentially the simplest part in maintenance of the fire sprinkler device. Only check around once a week to make sure it is always stuck in the accessible place.

In addition, the valve often has to be turned off to do maintenance or do work to the machine. When this is the case, be aware the water can only be cut off to the one place where the testing is being performed and only for as long as it is absolutely required. There is no room for taking needless chances.

Sprinklers tested

As we have already stated, anytime you want to check the real sprinklers, you need to switch off the switch. It’s a smart idea to place a brightly coloured sticker or belt on the valve while doing this as a simple cue to you or someone else walking by that the valve must be switched back on later.

Often warn the municipal authority that you are carrying out repairs of the fire sprinkler device. In case you decide to turn yours off for a test or as part of maintenance, the security system may know too. Asking the insurance agent is not a terrible thing, however. This is also necessary as it involves having yourself safe and performing routine repairs of the fire sprinkler device.